First Time Setup

getting to know your vmupro please see the image below to identify the main components and inputs of the vmupro the device should be sufficiently charged when you receive it to power it on for the first time, however, as batteries naturally lose charge while idle, you may find that you will need to charge it in order to power it on the vmupro requires a properly formatted microsd card (not included) in order to work any microsd card rated class 4 and above will work, of any size up to 2tb each gigabyte of storage space amounts to approximately 8192 dreamcast virtual memory cards (vmcs) for better performance when playing native games and games through emulators , a fast class 10 a1+ rated microsd card highly recommended lower performance cards may impact your experience with these features to prepare your microsd card, you will need any computer and a microsd card reader (or a full size card reader with a microsd to sd card adapter download the official “sd card formatter” software from the sd card association website run the formatter and select your sd card select “quick format” and give it a “volume label” if you’d like press the “format” button safely eject your microsd card from your computer and plug it into the microsd card slot (see image #1) of your vmupro powering up the vmupro for the first time when you power up your vmupro for the first time, you will be greeted with the "first time setup" application (see image below) press "a" to continue to the next step in the next step, you need to select your timezone if you can't find the timezone in the list, select the closest one to you this will be used by the vmupro to automatically set the time when it connects to the internet press "a" to continue to the next step, where you will setup your vmupro to connect to your local wifi network after a short scan, you will see a list of network names that the vmupro was able to find broadcasting select your wifi network and press "a" to move to the next step if your network is private, you will be prompted to enter your password if you do not wish to connect to your wifi network at this time, you can press the "mode" button to skip this step and conclude the first time setup you can return to the wifi setup at a later time if you wish, through the system settings menu to enter your wifi password, use the directional pad on your vmupro to select the first character of your password, and confirm with the button "a" repeat this process for the rest of the characters of your password when you have entered your password, move the selection cursor over the right arrow button at the bottom right of the screen, and press "a" to confirm then select either the "done" button to continue, or the "cancel" button to return to the keyboard if the password you entered is correct, the vmupro will connect to your wifi network and present the ip address that it was assigned press "a" to continue in the final step, the vmupro will check online for any software updates if one is available, press "a" to download and perform the update if no updates are available, the "a" button will finalise the setup and you will be taken to the home screen